• RICOH R5C486 CARDBUS PCI host controller
• Top side slot, type I,II and III cards supported
• PC card (PCMCIA) or CARDBUS card compatible
• Bottom side Slot for CF PCMCIA or memory cards
• Parallel use of ISA and PCI interrupts
• Supports 16-bit PCCards or 32-bit CardBus Cards +3,3V and +5V supplies
• Plug-and-Play automatic detection and configuration
• Onboard +12V programming power, +5V only board
• Can be configured into any PC/104Plus slot
• -40 to +85°C operational temperature
• Software and mechanically compatible with CTR-1462
• RoHS compliant

Drawings, diagrams and documentation:

• CTR-1463 view from bottom side
• CTR-1463 with Bluetooth card inserted
• CTR-1463 with WLAN card inserted

Application Areas:

• Combined WLAN, Bluetooth, GPRS, CDMA2000, UMTS
• MIL-STD-188 & NATO STANAG 5000 Secure communications
• Multiple format removable mass storage devices
• Proprietary telecommunications
• Tactical communication controllers
• General removable peripheral connectivity
• PCMCIA upgrading to PCI systems

The Eurotech CTR-1463 CARDBUS interface board expnds your system with support for high speed PCCARD/CARDBUS and CF-form factor cards. One card slot accepts type I, II or III cards and another slot supports smaller CF+ cards. This low power module combines support for legacy 16-bit PC Cards (PCMCIA) using ISA interrupts as well as 32-bit CARDBUS cards supporting PCI interrupts.

General application areas of the CTR-1463 board are in high integration removable system expansion such as with mass storage media, Wireless LAN, GPRS, CDMA2000 or 3G UMTS Cellular modems or Bluetooth interface cards as well as GPS receivers. Extensive driver and software support is available for the RICOH CARDBUS host controller chip for most popular operating systems. Compatibility with Windows is guaranteed with native driver support. The PCI bus is +3,3V powered and is +5V tolerant. Both +3,3V and +5V cards can be live inserted into the locking socket. The onboard programmable +12V Flash voltage programming voltage generator is provided for +12V memory cards. System configuration options are maximized by the support of both ISA and PCI interrupts in parallel.

Other peripheral related products:

• CTR-1462 Single slot PCMCIA/CARDBUS interface module
• COM-1273 Dual channel isolated CAN module
• COM-1274 8 serial port and 82527 CAN bus interface module
• COM-1461 IEEE-1394b Firewire interface module
• COM-1440 4-port USB 2.0 interface module
• ACS-5150 general purpose vehicle power supply

General Board Features:

• Supports Advanced Configure Power Interface (ACPI) power management
• Data Bus: 32-bit PC/104Plus
• Bus Compliant with PCI 2.1 33MHz
• ISA and PCI interrupt support
• PCMCIA/CARDBUS Slot: 1 Slot
• PCMCIA Card: Accepts I/II and III cards
• CF+ slot for type I cards, memory and device support
• Plug and Play: Support Plug and Play automatic detection and configuration
• Operating voltage: +5Vdc only
• Power consumption: +5V@70mA typical, depends on cards used

Physical Characteristics:

• Dimensions: 90 X 96 mm (3.6"X3.8"), height 15 mm (0.6")
• PC/104Plus expansion: 104-pin ISA and 120-pin 32-bit PCI connector
• Humidity: 0 ~ 90 %, non condensing

Order Code:

• [CTR-1463-00] CTR-1462 PC/104+ CARDBUS Interface ETR -40/+85°C

Options:

• Conformal coating
• PCI-104 version with ISA connector removed