• Intergrated carrier board with PC/104Plus expansion
• Extruded aluminum enclosure with structural heat dissipation
• PC/104 CPU options: 333MHz Geode® or 400MHz Celeron®
• Up to two Flash disks - DoM or CF
• Two serial ports RS-232/485/422 expandable up to 8
• Optional two Isolated CAN interfaces SJA1000 based
• I/O interfaces:
• Optoisolated digital inputs
• Optoisolated digital outputs
• Analogue I/O (Optional)
• USB ports USB1.1 or USB2.0
• Audio I/O
• Communication interfaces:
• WiFi 802.11b-g (MiniPCI card on system carrier)
• GSM/GPRS/EDGE or CDMA2000 1x (Optional)
• Analogue I/O (Optional)
• Bluetooth or Wireless USB
• 10/100Mbit Ethrnet
• Localisation:
• 12 or 16 Channel GPS receiver
• Gyro (External)
• Oedometer
• Expansion:
• One PC/104Plus expansion slot
• Two PC/104 expansion slots

The Eurotech "Bus-PC" is a widely tested and mature system platform designed for demanding mobile and vehicle installations in public tranportation. It combines a powerful freely programmable PC and application specific peripheral connectivity. Direct interfacing is available to the Eurotech PCN-1000 passenger counter.

System expansion and reconfiguration is easy due to the completely modular internal architecture and construction that bases on standard PC/104 and PC/104Plus board level products. The system supports wireless cellular communication over GSM/GPRS/3G or CDMA2000 and data transfer over 10/100Mbit Ethernet. High performance peripheral connectivity is possible using enhanced high current drive USB 2.0 port that supports direct connection of internal removable or external HDD units for mass storage.

All Eurotech systems feature a unique "system monitor" that increases system operating reliability and safety. Internal operations are controlled by the intelligent system monitor. Temperature and supply voltage monitoring combined with system device management is autonomously handled by the "system monitor" microprocessor.

The "Bus-PC" meets the requirements of EN50155 standard; extended operating temperature range (-25°C/+70°C) as well as resistance to humidity as well as shocks and vibrations commonly encountered in buses or trams.

To improve the mechanical durability locking rectangular watertight automotive AMPSEAL connectors are used. The WLAN and GPS antennas use N-series connectors to increase reliability. The back side panel of the system is dedicated for application specific I/O connectors.

Other related products and solutions:

• PCN-1001 - Contactless stereo vision based passsenger counter
• DuraVIS - Rugged 12,1" Mobile displays
• Rugged PC vehicle logic unit
• Embedded AVL computer for transportation

Processor options:

• 5x86 133MHz
• Geode® 333MHz
• Celeron® 400MHz

System memory:

• 128MB or 256MB onboard soldered DRAM

Solid state disk: (for OS and application software):

• Disk On Module
• Compact Flash (CF)

Hard disk (for data storage):

• External (USB 2.0 interface) Removable, Hot-plug
• Internal fixed (20 or 50GB Automotive HDD)

Communication:

• Fast Ethernet (10/100Mbps LAN controller)
• USB 1.1
• Hi-Speed USB 2.0 (with enhanced drive capability)
• GSM/GPRS/3G or CDMA2000 1X
• 2.4GHz high speed WLAN 802.11g and 802.11b

Audio:

• Audio interface with line in/out and microphone

Galvanically isolated digital I/O:

• 7 + 1 inputs (oe for Power ON signal)
• 8 outputs with isolation 500VAC@1min

Operating Systems supported:

• WinXPe, WinCE, LINUX

Internal system Monitor:

• System operation, processor temperature and internal voltage monitoring

Enclosure:

• Ultra light extruded aluminum construction
• Black anodized finish

Standards:

• Climatic compliance: EN 50155 (Humidity, Ambient temperature, Storage temperature)
• Mechanical compliance: EN61373 (Vibration and Shocks)
• Electrical compliance: EN 50155 (Power supply voltage dips, surges, insulation resistance)
• EMC compliance: EN 50121, EN 61000, EN 55011, ECE ONU reg.10 (immunity and emissions)
• Safety compliance: EN 60950

Connectors:

• Two IP65 protected AMPSEAL 35-pin male connectors for standard I/O
• One AMPSEAL 35-pin male connectors for system expansion
• N-connectors for WLAN and GPS

Dimensions (in mm):

• 269 x 185 x 82mm (L x W x H)

Power Supply:

• +8.4 to +40VDC (non-isolated) - EN 50155

Power consumption:

• 5W to 25W depending on CPU and functionality

Operating temperature ranges:

• 0°C to +60°C (standard)
• -25°C to +70°C (according to EN 50155 class T3)

Heat dissipation:

• No active cooling required, structural heat dissipation