Eurotech Finland > Product > ACS-5161 Isolated 60W PC/104 power supply

PC/104 60W isolated power supply module
ACS-5161

Features:

60W combined output power up to +85°C
100W peak output power up to +70°C
Overload protected
Wide input voltage range +18 to +36V DC
Onboard input filter stage, common and differential mode
Overtemperature shutdown of board and system
Input protected and filtered, suitable for 24 VDC battery installations,
reverse- over voltage and load dump protected
Input protected with automotive transient voltage supressor, 6600W
10/1000us
Output voltages: +5V, +12V
Output power: +5V@12A (20A peak), +12V@2.5A
Meets requirements of EC low voltage directives for CE compliance,
immunity and emissions
Designed for MIL-STD-801 and MIL-STD-461 compliance
-40 to +85°C operating temperature range (using structural heat dissipation)

Application Areas:

Mobile and machine control computers
Vessel and airborne systems
Process automation systems
Industrial controllers
Telecommunication equipment

Drawings, diagrams and documentation:

General Description:

The ACS-5161 isolated power supply is designed to meet the requirements of aircraft, vessel or industrial installations. An continuous output power of 60W (peak 100W) will provide adequate power to guarantee reliable operation under difficult load conditions. Resistance to high levels of shock and vibration are a result of the mechanical structure of the module. All heavy and big components are secured to the PC-board. The DC/DC converter is mounted on the bottom side of the board to easily facilitate the construction of a structural heat dissipation solution to a heat conductive base or enclosure wall. The ACS-5161 is intended to be mounted as the bottom most board of your PC/104 computer stack.

Reverse input voltage protection up to -45VDC and short term tolerance of spikes up to 50V (1ms) make this power supply the ideal choice for battery operated +24VDC systems. The onboard common mode input filter and protection circuitry meet the requirements of the EC low voltage directives for CE compliance EN55022-B and EN61000. Integration of the filter stage on the board makes system integration easier eliminating external pre-filter boards. Emissions are reduced by optimal board layout as well as filtering of all the outputs of the board including the power that is supplied into the PC/104 bus.

The output voltages are available through the PC/104 bus as well as removable terminal blocks on the side of the module. Indicator LEDs show the status of the power outputs. The power supply can be switched ON/OFF remotely with a switch or ignition key of a vehicle.

Eurotech manufactures a dedicated isolated power supply for military ground vehicled or aircraft. The ACS-5175 has 75W of output power and has a proprietary three stage input protection and filter stage to meet the requirements of MIL-STD-461/1275 and MIL-STD-704.